Hushmat Custom Vehicle Sound Deadening and Thermal Insulation Trunk Kit treats the floor, rear quarter panels and trunk lid.
Reduce that aftermarket engine, exhaust drone, road noise, vibration and the noise that disrupts your ride and reduce the heat that comes from engine, headers, exhaust and catalytic converter with one USA Made material, light weight HushMat Ultra.
The 911 trunk is cavernous and constructed in sheet metal. The trunk generates a drum effect and noise that can enter the interior. The HushMat trunk kit is designed to eliminate this drum effect and keep the interior quiet. The HushMat trunk kit is enough material to sound deaden the trunk floor, front wheel wells and trunk lid.
|HushMat Ultra Specification Sheet.pdf
|HushMat_Ultra 200-400-800 Hz Graph SAEJ1637.pdf
|TRUNK KIT_Sell Sheet_FINAL.pdf
|Universal Trunk Installation.pdf
|Damping Pad MSDS.pdf
|1990 - 1993
|Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion
|Polymer - Black; Backing - Silver
|Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard
|6.5 - 9.0mm ?ASTM D-5
|Thermal Acoustic Insulation
|Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported.
|HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product.
|At least 6 months when stored at 40 degrees C or less
|1.47 (approx. 0.47 pounds per square foot)
|HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions.
|Seller warrants marketable title to the Product, free and clear of all liens and encumbrances. Seller makes no other express or implied warranties beyond that stated on quoted product, statutory or otherwise.